The rare earth material that it is constructed of creates the strongest type of permanent magnet, producing a magnetic field that is significantly stronger than ferrite, alnico or ceramic magnets. Some added bonuses of using a rare earth drum magnet for ferrous metal separation over other magnetic separation methods include their self-cleansing capabilities, their greater magnetic pole area, their powerful surface holding power, their minimum space requirements and their versatility, making them useful for a variety of purposes. These magnetic separation machines can be used for almost any metal separation job.

Separating out the ferrous metals purifies the product stream so that only the more valuable non-ferrous metals remain. Ferrous scrap metal includes iron and steel recovered from autos, farm equipment, household appliances, structural steel, etc, and non-ferrous scrap is all metals other than iron and steel, such as aluminum, copper, zinc, lead and nickel. Non-ferrous scrap metal represents a smaller percentage of scrap metal, but has a higher market value.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see full company inventory of all products, click here.

Gensets are stationed near the end-user, rather than in a central location such as those utilized by commercial power providers, making them a smart piece to own as a backup in industries that rely on a steady source of power, or in undeveloped countries and rural areas where central power is unreliable. They are also a good source of power to augment an existing system.

This CAT 750 kW Genset is a Model 3508 Turbo Diesel Engine with a CAT 750 kW/938 KVA, 60 Hz, 4160 V, 130 amps generator. It has an excitation of 33 V, 7.3 amps. This generator comes with controls, and with only 478 hours of previous use, it is in good working condition.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all gensets available now, click here. To see full company inventory of all products, click here.

Vibratory conveyors employ vibration to move material horizontally or uphill. The vibratory drive that powers these units offers a full range of adjustable outputs and is the most versatile and energy efficient drive on the market. These conveyors use vibratory action to supplement gravitational forces in order to discharge or densify material in stored containers, creating maximum efficiency by conveying and classifying material at the same time.

The General Kinematics Model FRC 60/66X5 Vibrating Feeder has a feeder table that is 60″ at the bottom, flared to 66″ at the top x 24″ deep x 6′ long. The vibrating feeder is powered by a 2 hp, 230 V, 3-phase, 720 rpm electric motor. The floor is constructed of 3/8″ AT 400 liner. It is equipped with a heavy-duty frame and stand and is in good condition. Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all screening and classifying equipment available now, click here, to see all conveyors available now, click here. To see full company inventory of all products, click here.

Rotary Kilns are used to reduce the moisture content in a variety of materials. In almost every industry, at some point in the process, materials need to be dried, making rotary dryers a very versatile piece of equipment. Whether it’s the beginning, middle or final step in the process of material flow, a rotary dryer will make things quick and efficient allowing the process to flow faster and more smoothly, making them a crucial component at any site.

Rotary Dryers minimize the moisture content by bringing the material into direct contact with a heated gas. As the dryer rotates, the material is lifted by a series of fins, called flights, lining the walls. As the material rolls back down off the flights, it passes through a hot gas stream and falls to the bottom of the dryer. The application of this rotary dryer is four-fold. First, it separates green sand from core sand and dramatically improves sand conditions. Next it screens the sand itself, eliminating the need to buy and maintain extra equipment. It then produces cleaner castings, greatly reducing shot blast time and reducing labor in the knockout and finishing departments. Finally, it cools the castings enough to enable them to be handled with gloved hands.

Their versatility makes rotary dryers useful in a variety of industries from pharmaceutical to minerals processing, and they are used for a variety of applications from fertilizer preparation to pastry drying. Rotary kilns are a valuable piece of equipment in one of the recycling industry’s rising fields: the soil and environmental remediation industry. This industry is responsible for removing pollution or contaminants from sources such as soil, groundwater, sediment or surface water in order to protect human health and the environment. The process is also used at abandoned industrial or commercial facilities to make them re-developable. Rotary dryers use the hot air from a burner to heat the soil to a temperature high enough to destroy all the contaminants, but not so high that the soil is incinerated. This way, the newly-cleaned soil can be mixed with fresh soil to be recycled back into the environment to be reused, rather than being landfilled or destroyed in an incinerator.

After alternating years of growth and decline in 2010 and 2011, the remediation and environmental cleanup services industry is predicted to be on the upswing in 2012 and beyond. According to an IBIS World market research report, this industry growth is supported by demand from construction companies that will require these services for their projects. Although government spending in this area is set to decline, private sector spending is increasing and is now a main source of funding.

This revival makes the soil remediation industry more profitable than ever, and buying used in perfect for those just starting up or looking to invest further. This fully refurbished Didion Rotary Kiln is in good condition and is a great addition to any remediation or drying site. Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all rotary dryers available now, click here. To see full company inventory of all products, click here.

The Clarage MTSA-160-9CYT-A-N/R-STD Cyclone is a 160 – 9″ Tube Multi-Clone designed for 50,000 SCFM flow, 118,900 ACFM at 800 F. It has a draft loss of 3″ W.C. through 3 discharge hoppers with access doors. The Multi-Clone’s removal efficiency is greater than 99% for all over 15 micron particle size. The unit was purchased NEW in 1998 and never used.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see full company inventory of all products, click here.

Vibratory conveyors employ vibration to move material horizontally or uphill. The vibratory drive that powers these units offers a full range of adjustable outputs and is the most versatile and energy efficient drive on the market. These conveyors use vibratory action to supplement gravitational forces in order to discharge or densify material in stored containers, creating maximum efficiency by conveying and classifying material at the same time.

The Stainless Steel Vibrating Conveyor is 8′ long x 22″ wide with a 17 3/4″ wide x 6″ deep pan. The conveyor is an Allen Fruit Co Model MGD47783, serial CON18024 and has been restored to good condition. Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all screening and classifying equipment available now, click here, to see all conveyors available now, click here. To see full company inventory of all products, click here.

Using a daisy wheel trommel screen to accompany shredding is beneficial, especially when the product being shredded needs to be taken down to a specific size. As the material comes out of the shredder, it is dropped onto the daisy wheel trommel. If the pieces of shredded product are too big to fit through the screen openings on the daisy wheel, they will lay on top of the wheel and be spun around and dropped back through the shredder. This is repeated over and over in a loop until all of the material has been shredded down to a small enough size to fit through the trommel screen. To see an example of the process, click here.

This Eidal Model 62 x 41 Shredder with Trommel Screen is a low-speed/high-torque shredder powered by a 200 hp, 480 V, 3-phase electric motor and comes equipped with 62″ x 41″ throat opening, new shaft, new gear, newly rebuilt electric motor, new jam nuts, new 2″ knives, infeed hopper, stand, 2″ screen opening daisy wheel trommel screen and controls. The shredder is in good condition and is excellent for processing e-waste, tires (produces 2″ chips with trommel), plastics, rubber, computers & accessories, light metals, batteries, 55 gallon barrels, wood products, etc. The unit comes with the option of a daisywheel trommel Screen with 2″ screen openings.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all shredders available now, click here. To see full company inventory of all products, click here.

Conveyors are useful in various industries, including manufacturing plants, distribution centers, packaging lines and metal stamping. As their name implies, their primary purpose is to convey material from one area to another in a quick and easy manner. The use of a conveyor reduces manual labor, because the conveyor system does the moving work for you. Their basic function makes conveyors very versatile pieces of equipment that can be used for almost any material moving job. This heavy-duty aluminum-belted model is perfect for conveying material as part of a recycling line, such as transferring it to a shredder or baler to be processed and recycled.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all conveyors available now, click here. To see full company inventory of all products, click here.

Haybuster tub grinders have been widely depended on by farmers and ranchers since the 1960s because of their durability and high performance results. Haybuster grinders make commercial hay grinding easy and profitable. The durability and dependability of the Haybuster brand ensures that even a used unit has years of work to offer when maintained and used properly, especially a unit such as this Haybuster Model HD-8 Tub Grinder that has so few hours of previous use and has been fully reconditioned and thoroughly inspected by the Worldwide Recycling Equipment Sales, LLC professionals.

Haybuster tub grinders come equipped with a hammermill with swinging hammers that do the grinding work. Hammermills are grinding machines used to shred or crush aggregate material into smaller pieces. Material is passed through a wide feed hopper, falling into the grinding chamber. The grinding chamber contains a rotating hammer rotor with swinging hammers that crush the material and drive it through a screen, thus using impact grinding to reduce the material into smaller scraps.

The large volume handling capabilities and quick processing rate makes grinder use a quick and efficient way to recycle wood waste, C&D waste, MSW and a variety of other raw and agro products. And, Haybuster tub grinders are not limited to just farm and ranch waste. One growing industry that requires constant use of a grinder is wood waste recycling. With the range of recycled products made from wood waste spanning from shoreline erosion prevention products to fish and bird habitats to reusable mulch for trails, landscape, gardening and playgrounds, the wood recycling industry is on a lucrative rise, making the purchase of a tub grinder more cost-effective than ever.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all grinders available now, click here. To see full company inventory of all products, click here.

Once the cut tires are received at a tire recycling plant, they are processed and refined using size-reduction techniques, such as sending the tires through a shredder or grinder. The rubber is taken down to various crumb sizes, used to produce different products, depending on the size. Smaller particles are used for a variety of industrial, athletic field, paving and landscaping applications, while larger pieces are used in civil engineering, as a substitute for stone aggregates or as fuel to power kilns, mills and power plants. As more and more states prohibit the disposal of whole tires into landfills, the tire recycling industry has been on the rise. With markets existing for recycling and reuse for more than 80% of scrap tires nationally and the amount of landfills accepting whole tires rapidly declining, there is a high demand for used tires.

Worldwide Recycling Equipment Sales, LLC is constantly replenishing its stock; to see all tire recycling equipment available now, click here. To see full company inventory of all products, click here.